weld是什麼意思_音標_用法_例句

簡單釋義：

v. 焊接；熔接；鍛接；使緊密結合

n. 焊接點；焊接處

網路 焊縫

變形：

第三人稱單數：welds  現在分詞：welding  過去式：welded  

完整釋義：

n.

1.焊接(點),熔接點
2.堆焊縫
3.焊;鍛接;結合
4.黃木犀草
5.【植物;植物學】淡黃木樨草;(由淡黃木樨草採取的)黃色染料

v.

1.被焊接[熔接]
2.焊[熔]接;使密切接合,結合
3.使結合在一起;連綴在一起:

例句：

1. Applied to reduce the floor wedge between the wall and floor, The skirting board weld with the floor to be waterproof and germ proof .
   用於地板和牆面收口，地腳線和地板熱焊形成一體，達到防水防菌效果。

2. The program represents a weld with a bright orange line. The weld symbol is attached to the cosmetic weld, as shown in the following figure.
   熔接由鮮亮的橙色線表示。熔接符號即貼附至表面熔接，如下圖所示。

3. It was found that manganese burns off in the arc during melting of a droplet at the wire end, and from the weld pool during weld formation.
   從焊接水池被發現錳燒掉在弧在熔化小滴期間在導線末端，和在焊接形成時。

4. Examples of this type of inspection would be the presence of; weld nuts, weld studs, pierce studs, small brackets and pierced holes.
   此類型的檢驗應該包括以下樣品：焊接螺母、焊接螺柱、貫穿螺柱、小支架以及貫穿孔。

5. It shall be welded to the connection rails which are formed of standard rails from its four ends by an electrical weld.
   它應該從其四個末端通過電焊焊接在由標準軌構成的連接軌上。

6. post weld heat treatment and the surface lubrication after removing welding scar.
   闡明了焊接質量主要受焊接工藝、焊後熱處理、去疤後的表面潤滑影響。

7. The mechanical properties of the weld is the best when the surface energy in the best value.
   試樣彎曲角隨面能量呈山型變化趨勢，只有面能量處於最佳值時，焊縫力學性能最佳。

8. For multi-layer welding except for rood weld, high-temperature phase has no effect on angle distortion.
   而多層焊接除首層以外的其他層焊縫，高溫相變對角變形變化不產生影響。