weld是什么意思_音标_用法_例句

简单释义：

v. 焊接；熔接；锻接；使紧密结合

n. 焊接点；焊接处

网络 焊缝

变形：

第三人称单数：welds  现在分词：welding  过去式：welded  

完整释义：

n.

1.焊接(点),熔接点
2.堆焊缝
3.焊;锻接;结合
4.黄木犀草
5.【植物;植物学】淡黄木樨草;(由淡黄木樨草采取的)黄色染料

v.

1.被焊接[熔接]
2.焊[熔]接;使密切接合,结合
3.使结合在一起;连缀在一起:

例句：

1. Applied to reduce the floor wedge between the wall and floor, The skirting board weld with the floor to be waterproof and germ proof .
   用于地板和墙面收口，地脚线和地板热焊形成一体，达到防水防菌效果。

2. The program represents a weld with a bright orange line. The weld symbol is attached to the cosmetic weld, as shown in the following figure.
   熔接由鲜亮的橙色线表示。熔接符号即贴附至表面熔接，如下图所示。

3. It was found that manganese burns off in the arc during melting of a droplet at the wire end, and from the weld pool during weld formation.
   从焊接水池被发现锰烧掉在弧在熔化小滴期间在导线末端，和在焊接形成时。

4. Examples of this type of inspection would be the presence of; weld nuts, weld studs, pierce studs, small brackets and pierced holes.
   此类型的检验应该包括以下样品：焊接螺母、焊接螺柱、贯穿螺柱、小支架以及贯穿孔。

5. It shall be welded to the connection rails which are formed of standard rails from its four ends by an electrical weld.
   它应该从其四个末端通过电焊焊接在由标准轨构成的连接轨上。

6. post weld heat treatment and the surface lubrication after removing welding scar.
   阐明了焊接质量主要受焊接工艺、焊后热处理、去疤后的表面润滑影响。

7. The mechanical properties of the weld is the best when the surface energy in the best value.
   试样弯曲角随面能量呈山型变化趋势，只有面能量处于最佳值时，焊缝力学性能最佳。

8. For multi-layer welding except for rood weld, high-temperature phase has no effect on angle distortion.
   而多层焊接除首层以外的其他层焊缝，高温相变对角变形变化不产生影响。